We highly recommend using baby oil/jell or a similar product after showering, applying to the penis with a cotton swab. This allows the penis to naturally move up and down in the cage portion. After this has been accomplished you should be able to wear it 24/7 for indefinite periods of time...1 months, 3 months...wearer and Keyholder ultimately determine the period of time! |
|
The CB-3000® consists of 2 parts:
Comes in five sizes: 1 1/2”, 1 5/8”,
1 3/4”, 1 7/8” & 2.0”. These five
sizes come with each order. This
allows the wearer to experiment
to find his exact size. The rings
swivel at the bottom making it
easy to put on. Each ring consists
of two guide pin holes and a
recessed locking pin hole. Spacers
|
 |
The material is a highly durable polycarbonate. It is very light weight which adds to the comfort. It is vented with slots allowing natural air drying. The design also allows for hygiene when bathing. Use a soapy sponge or cloth to allow the soap and water to clean the interior of the cage.
If traveling, make sure to wear a numbered plastic lock if going through metal detectors. It has been reported that some men have worn the brass padlock and have not had any ‘alarming’ experiences, however, the plastic lock is still recommended. |
are provided for an individual fit. These spacers go over the locking pin, between the cuff ring and the cage.
Cage Portion (Inside Length 3” - Inside Diameter 1 3/8”)
The cage portion has two guide pins and a locking pin hole. The cuff ring goes behind the ball sack and over the penis. Install the locking pin and the spacers. Put the cage over the penis and then line up the cage portion with the cuff ring. Slide the guide pins and locking pin into place and attach a lock on the tip of the locking pin. Once you have found the exact fit, cut the ends of the guide pins with a pair of side cutter pliers and smooth the edges with an emery board.
|
